GANTRY PROFILEPROCESSING CENTER
(SLG16 / G16L-SLG20/ G20L)

The X-axis direct drive transmission replaces the traditional mechanical transmission method, combined with an absolute grating scale, greatly enhancing the dynamic response performance of the X-axis (long stroke) and achieving a high maximum operating speed of up to 60m/min.

Product Introduction

GANTRY PROFILEPROCESSING CENTER
(SLG16 / G16L-SLG20/ G20L)

Suitable for long strip-shaped profiles

Process both ends by drilling and tapping

milled surface part

Item	Unit	SL-G16	SL-G16L	SL-G20	SL-G20L
X/Y/Z Travel	mm	1600×500×300	1600×500×300	2000×500×300	2000×500×300
Worktable Size	mm	1700×500	1700×500	2100×500	2100×500
Worktable Load Capacity	kg	600	600	600	600
Distance from Spindle Nose to Worktable	mm	150–450	150–450	150–450	150–450
T-slot on Worktable	mm	5-18×100	5-18×100	5-18×100	5-18×100
Spindle Taper / Diameter	-	BT30 (Φ100)	BT40 (Φ150)	BT30 (Φ100)	BT40 (Φ150)
Spindle Speed	r/min	20000	8000/10000	20000	8000/10000
Rapid Feed Rate (X/Y/Z)	m/min	32/48/48	24/36/36	24/48/48	18/36/36
Ball Screw Specification	mm	X: 50×16 Y: 40×16 Z: 32×16	X: 50×16 Y: 40×16 Z: 32×16	X: 50×16 Y: 40×16 Z: 32×16	X: 50×16 Y: 40×16 Z: 32×16
Linear Guide (Guide Rail Width)	mm	X:45 YZ:35 (Y-axis 4 rails)	X:45 YZ:35 (Y-axis 4 rails)	X:45 YZ:35 (Y-axis 4 rails)	X:45 YZ:35 (Y-axis 4 rails)
Machine Weight (Approx.)	kg	~5500	~5600	~6100	~6200